Vacuum port

[Dan Hunt]

Where does the vacuum for the distributor go on a 881 with original carbs?

 

[BSL409]

Where does the vacuum for the distributor go on a 881 with original carbs?

back of the 3362 or 3804 carb

 

[Dan Hunt]

The back carb has the PCV.(1963)l will get a T fitting and plug the distributor on there.
Thanks

 

[Fathead Racing]

Get a hollow stud. Not correct but clean.

 

[4speedman]

I thought the distributor vacuum went to the front carb there is a fitting that goes in the rear of the carb with a vacuum hose size outlet on it at a 90 degree angle . You have to remove the carb to install the fitting. I think i got the fitting from show cars

 

[La Hot Rods]

 

[El Rat]

Gibbs said front carb in dual carb setup

 

[Dan Hunt]

I'll see if I can find the fitting or the hollow stud locally. Thanks for the help.
I bought the PVC set up from Show Cars last week $30 and thought that was a good deal. Then USPS and Canadian Postal Service charged me another$32 for freight.