Yet another balancer issue!

[three_deuces]

I have, what appears to be a 348 balancer. Not for sure. Measures 6" across like a 348 balancer. Part number could be one of two ways. 3883285 or 3883528. The front has 7706 and beneath that is C 9 F. Any clue what this is for?

 

[09Jud]

Looks like a 327 - small Journal- short water pump damper if you are exteraly balanced it is good to use.

 

[tripower]

Difficult to tell from your pics. Here are a couple of examples. The first balancer is a SB the second is a FE348/335 balancer on the left and the 348/250 on the right that Cecil sent me a pic of. The third is a balancer that came off of a FH348/350. Notice the step on the back of the FE & FH balancers.

 

[three_deuces]

Thanks for the help guys. At least I have a good idea what it's for now. I did find one more balancer that could be for a 348. Looks just like the one in the third pic that you posted Tripower. The one on the right. Haven't been able to find any numbers yet. Where should I be looking for them on a 250/348?

 

[tripower]

Thanks for the help guys. At least I have a good idea what it's for now. I did find one more balancer that could be for a 348. Looks just like the one in the third pic that you posted Tripower. The one on the right. Haven't been able to find any numbers yet. Where should I be looking for them on a 250/348?

Yep, That is the same balancer as on right in pic 3. That same balancer was used on 283 as well but the trimming mark is different if it was used on 283.

 

[three_deuces]

Yep, That is the same balancer as on right in pic 3. That same balancer was used on 283 as well but the trimming mark is different if it was used on 283.

I read somewhere on this site lastnight that the timing mark is in line with the key way. Don't remember where. This balancers timing mark is. Luck looks to be on my side! Thanks for your help! bang