Gang, I’m in the process of having my Saginaw 3 speed rebuilt and thought I’d start looking for a suitable bell housing. My 283 is a ‘67 block and the 3 speed is dated ‘61. I looked in both the assembly and shop manual for the ‘61 pn#, but could only come up with 3779552. Is this correct? Can I look at other years as a suitable donor?
Thanks!
Rear of the gearbox mounting bolt pattern
The old 6 cylinder bell housing
The rear of my block
Thanks!
Rear of the gearbox mounting bolt pattern
The old 6 cylinder bell housing
The rear of my block