mike sabousky
Member
Does anyone make a mini starter that bolts into the bellhousing for the 409.
Thanks Don for the tip about the mounting bolts, I will be sure to use GM bolts.Execellent!!!!!!!!!!!!! I'd suggest using the GM mounting bolts though as they're stronger.
Thanks Ron, thats what I am running a 168T flywheel.The DB mini staggered bolt starter that I have only works with 168 tooth flywheel.
I am running a Vertex mag so that could be some helpful info, Thanks 32witha409Had one of those on my 409 in the beginning, but found that under certain conditions it would not crank fast enough for my magneto to light the engine off reliably. Went to a Powermaster Ultra Speed 9450 or 9452, haven't had an issue since. Doubt I would have had an issue with standard ignition.