Will youtube it then. Think I went to school with that guy.
I believe Scott used a piece of paint stick on the '62.Yes, there is very little space behind the cover. I am going to use a cedar shingle shim for now.
Thanks Lonnie, I'll look at that option too.I believe Scott used a piece of paint stick on the '62.
Lonnie
NO NO NO RAY!!!!!!!! It must be oak or walnut for NHRA approval!!!!!!!!!!!!!!!Yes, there is very little space behind the cover. I am going to use a cedar shingle shim for now.
Yes on both counts. I checked and had clearance.and add pressure on front gearing etc?
An SFI paint stick?NO NO NO RAY!!!!!!!! It must be oak or walnut for NHRA approval!!!!!!!!!!!!!!!
Yeah Ray, You'll need to send it in and have it recertified for ONLY $40 per stick every 2 years.An SFI paint stick?
It's not Don but I think it's close enough. Those covers aren't that flimsy.If it's in about the center of the timing cover,I'd think so,Ray.