I didn’t mark or pay attention to the screw holes for the trim and rear view mirror before I put the headliner in the car. I took pictures of the sun visor, coat hooks and dome light holes tho. For the trim above the windshield, I believe it’s 2 pieces with the rear view mirror between them, does anyone have a picture or measurement of where one of the screw holes for the trim is? If so I might be able to manage finding the other hole.
1964 headliner trim screw holes
- Thread starter 4Eyedturd
- Start date
Use the aluminum trim and the holes in the trim for the screws. start at one end
and use a small Philips screw driver that is is small enough to fit into the factory screw holes in the tack strip....
use the front and rear aluminum trim on the windshield and back glass to find the holes.
and use a small Philips screw driver that is is small enough to fit into the factory screw holes in the tack strip....
use the front and rear aluminum trim on the windshield and back glass to find the holes.
Bingo, it clicked when I saw that. Find the center hole for the rear view mirror and slide the trim onto it. That got it, thanks guys now it gets red fuzzy dice the kids got me.