'37-4D
Well Known Member
That guy running a magnito?.025-.030 is what they typically use.As for your engine go back to .035.I've seen engines that did not like close plug gaps.
He has a Chrysler electronic ignition on his Hemi motor.
That guy running a magnito?.025-.030 is what they typically use.As for your engine go back to .035.I've seen engines that did not like close plug gaps.
Hi Guys,
I'm looking for the lower half bell housing or dust cover. Not sure where to start. I believe there are new replicas out there, see link:
http://vi.raptor.ebaydesc.com/ws/eB...487626000&ver=0&cspheader=1&oversion=c0dd1b97
https://www.amazon.com/BELLHOUSING-TRANSMISSIONS-REPLACES-COMMONLY-BELLHOUSINGS/dp/B01MU7A5KA
My '58 348 motor originally came with a Powergilde tran. I believe the housing came with. No lower half!
I don't like the underneath exposed. Open to suggestions.
Please keep in mind I'm in Canada.
@Don Jacks Does Show Cars have one?
I suppose your source depends on your goal. Those generic inspection covers are commonplace in the aftermarket (I think I bought mine from Speedway Motors), but if you need a true 348 year and model specific one then it may not be so easy. By the way, I had to get out the tools and trim mine to fit, but it works fine.
John
Yes Kevin,Show Cars does sell them, most likely the one that you'll need is pn 1058.