Figure you guys would like some update pictures, I know I do.
Needed to make a little room for the seats so I can work on fixing the pan floor pan install so the engine is now in the hole.
The pan was just tacked on the edges so I used my spring loaded spot weld cutter to drill the pan only for some spot weld holes.
Not sure what they thought they were doing here.
or here
So the good thing was it didn't take much to get it out.
Need to fix this butchered end and fit back in place to mark for more spot weld holes.
Got my tools out for the reinstall.
Funny how most projects inspire some tool modification to pull a job off.
I added an extension to the vice grips to clamp where I don't have assess fo a backer.