just cross reference the part # for the throwout bearing that you have. Should be able to find a length once you look that up. I used the Centerforce throwout bearing with the Centerforce dual friction clutch and couldn't be happier
Like Jason mentioned I used the exact same components as him and all is well...just cross reference the part # for the throwout bearing that you have. Should be able to find a length once you look that up. I used the Centerforce throwout bearing with the Centerforce dual friction clutch and couldn't be happier
Kevin, Verify that you have the correct throwout bearing installed. The 1 7/8" long bearing is used with the diaphragm style pressure plate and the 1 1/4" long bearing is used with the 3 finger Borg and Beck style pressure plate. I just went through this hard pedal, hard to adjust, etc. with a friend of mine that had clutch problems for years. Found the short bearing installed on his diaphragm clutch. Put in the long bearing and all his good. BTW, This clutch was so screwed up that he broke two Z bars. Leo