If the parts car is a 2-door...save ALL the interior parts!! 4-door....not so much.
Poor ol’ girl
Still had a ton of parts on it tho, like you said. Are you saving the door and rear side panels and front and rear seats? I’d be interested in buying all of the above if you’d wanna sell em.
The car had no seats, and I need whats left of the door panels for my car. I also had to harvest the interior window garnish moldings for mine, as they were missing too.
I'm pretty much taking every possible bolt, clip, wiring, glass, window regulators, etc.
Probably keep the steering box, and I'm going to keep the rear portion of the frame so I can use it to mock up a triangulated 4 link rear minus panhard bar.
Its got a nice pair of manual trans pedals & linkage, speedo housing, heater controls and cables, radio, knobs,switches, wiring harnesses,etc.
If someone needs the ends of the quarters with the tail light cove, I could cut those off.
There is not any good sheetmetal. The only piece worth saving was the cowl vent panel, which mine needed.
The other part I needed was the front filler between grill and bumper, and this one has a rot hole in it.