Bartman409SS
Well Known Member
Hi folks. Well it begins...
Going to start with replacing trunk area floor pans and the front drivers side. Full replacement pans came with the car but I won’t need them all. The car is actually very solid. As for the body, only surface rust and a couple small areas on the lower drivers fender and lower rear quarter. That’s it. As you can see the lovely diamond tucked interior from the 70’s and the Powerglide and 409 are in the car. The heads were removed and rebuilt already to 425 hp specs.
I’ll keep updating the thread with new pics as things progress.
thanks
Barry
Going to start with replacing trunk area floor pans and the front drivers side. Full replacement pans came with the car but I won’t need them all. The car is actually very solid. As for the body, only surface rust and a couple small areas on the lower drivers fender and lower rear quarter. That’s it. As you can see the lovely diamond tucked interior from the 70’s and the Powerglide and 409 are in the car. The heads were removed and rebuilt already to 425 hp specs.
I’ll keep updating the thread with new pics as things progress.
thanks
Barry
Attachments
-
53E065F1-E697-4476-9C58-8C72A06DD2E1.jpeg133.7 KB · Views: 66
-
B4AA2272-0939-4899-89B8-078195255CD1.jpeg144.5 KB · Views: 65
-
29C3F468-777C-4A94-87C4-CFC67B142F73.jpeg98.4 KB · Views: 70
-
76AF5A32-A89E-4CC5-92EC-2C3F4F3DFA9D.jpeg95.4 KB · Views: 74
-
4D2DF28F-D94E-4525-B1B6-C4D309FD93D3.jpeg92.8 KB · Views: 71
-
EA0EC876-C5BD-4733-86D9-D29E7B234BE0.jpeg82 KB · Views: 69
-
8FCC945A-99E6-4D62-89E3-86BB14C3BC98.jpeg107.6 KB · Views: 68
-
1E761733-6F50-411A-964E-D5429CF05537.jpeg145.9 KB · Views: 69
Last edited: