I’m here….
pulley bracket is painted gloss black like the factory did.
bead blast parking brake mechanism to bare metal
tape off to paint pedal black like the factory did - not easy but can be done
clear coat paint both sides of bare metal on parking brake mechanism - to stop rust ( factory left them bare metal )
paint the pull back springs black - the ones attached to the mechanism ( there were black from the factory )
paint the pull handle on the mechanism black - also like original was ( not easy to tape off to not paint the bare metal black but it can be done -
install new black white lettered plastic handle ( probably have to glue plastic handle to the black painted handle on the mechanism - repro handles are threaded ( 61 & 62 parking brake pull handles on the mechanism are not threaded - not sure on 63/64 pull handles having threads
i paint the 2 mounting studs for the mechanism through firewall silver to match zinc plated hex mounting nuts for firewall
i zinc plate the cables ( both cables) and the other linkage that connects the cables( i think most of the linkage was plated) - option paint silver after bead blasting
i also zinc plate the special pulley bolts and special bolt washers to stop rust and zinc plate the hex mounting bolt for the pulley firewall bracket
i zinc plate the hex firewall nuts ( or paint silver ) they were plated from the factory to my knowledge
you may need a new round rubber grommet for the cable through firewall ( they get ripped either from age or use
Paul