So my 64 stock Intake manifold has a spot for the threaded dual dummy lights for the hot cold temp sensor.
While that is very cool and nostalgic , I want to add a set of gauges somewhere under the dash, that gives me a nice number to monitor from the drivers seat.
I want the oil pressure and Temp gauge to both be mechanical. Is there anyone who has done this? I am sure probably a kazillion times, if so, ?
what ports are you using if I use the current ports for the intended factory switches.
It is a factory 409/340 with original intake manifold, single 4 barrel.
do they make a "Y" type fitting? or is there other ports that I am not aware of that can be used?
Also if you have a good brand reference I would be interested also, I am wanting like a 3 gauge set up type system.
While that is very cool and nostalgic , I want to add a set of gauges somewhere under the dash, that gives me a nice number to monitor from the drivers seat.
I want the oil pressure and Temp gauge to both be mechanical. Is there anyone who has done this? I am sure probably a kazillion times, if so, ?
what ports are you using if I use the current ports for the intended factory switches.
It is a factory 409/340 with original intake manifold, single 4 barrel.
do they make a "Y" type fitting? or is there other ports that I am not aware of that can be used?
Also if you have a good brand reference I would be interested also, I am wanting like a 3 gauge set up type system.
Last edited: