Need some help I hooked up my jump box wrong what did i burn out?
348 with a pertronix 3 ignition won't start.
I pulled a spark plug and checked it for spark it has spark. Whats should i check next?
I replaced the battery
So do i run a new wire from the ignition switch to distributorNo,the Pertronics will work fine with your stock plug gap of .035. Just make sure to by pass the ballast resister so the ignition system gets full battery voltage.Many of the Pertronix units can use the stock cap.Just make sure that you order one with the female cap terminals.
Im use the flame thrower billet distributor D7101700 it says its for 409 so i should work for 348
Thanks Paul, is this what you had my unit converted to!Yes it will, I have one in my 62 SS 409 hardtop with my converted to electronic factory Sun Tach.