Kaycee
Well Known Member
Ok Front end completely rebuilt ,just redid inner and outer tie rods and new idler all moog parts. Pulled everything apart 1 at a time and reinstalled I measured tie rods and put he new ones according make it close to get it in for alighnment. Drivers side is straight and allso the steering wheel, but the pass. side is way the f $%* off I screwed the adjusting sleeve in until they bottomed out on the pass side but tire is off at least 20 degrees IDK what went wrong the idler arm used a spacer between the frame and idler. The tires wore great before no problems at all Do I split the difference between the sides to even it up ? Both sides were pretty equal in distance from center of inner to outer tie rods 19 3/4" on each side, now its 19 3/4 on drvs. side and about 18 on pass side .