61 Bubble
Well Known Member
Ok even thought the sheet metal on my '61 is PONTIAC, is really a Impala underneath. I have some questions:
1. My rear pass side seems to go down fine and is free doing so, yet when I roll it back up, about 2 inches from the top, the crank starts "skipping" and you can feel it pushing the crank away from the mechanism? Also even pulling the window with my hand I can barely close it while cranking and pulling.
2. The other rear window just seems stiff. Been lubricating it yet seems to have some tight spots, nothing seems to help?
Any ideas that might help a guy out, or a pair of good working used mechanisms for a bubble-top for sale???
Thanks John
1. My rear pass side seems to go down fine and is free doing so, yet when I roll it back up, about 2 inches from the top, the crank starts "skipping" and you can feel it pushing the crank away from the mechanism? Also even pulling the window with my hand I can barely close it while cranking and pulling.
2. The other rear window just seems stiff. Been lubricating it yet seems to have some tight spots, nothing seems to help?
Any ideas that might help a guy out, or a pair of good working used mechanisms for a bubble-top for sale???
Thanks John