BubbletopMan
Well Known Member
I guess it would be irresponsible of me to not post some information about my gaskets here. The header gaskets I sell are multi-layer stainless steel and are patterned off of the original '690 high performance cylinder head port layout, but they are made tight enough that they can fit the low performance heads or 348 heads with no modifications needed. If your heads are ported, the gaskets can be easily opened up with a die grinder, just bolt them to the head to compress them or place them in a vise if a head is not available. I ship to the continental US, presently, all anyone needs to do is PM me with your needs and/or questions. As anyone who has bought gaskets from me will attest, I do my absolute best to get the parts out to my customers as quickly as I possibly can once payment has been received. I do not have an ebay store or website, I only sell these gaskets here as a courtesy to all of the forum members. I'm not trying to get rich with these at $35/ set, I'm merely trying my best to fill a need for a good gasket that will last a long time. Jeremy