hey guys
I need some infomation with elderbrock 500 cfm carb.
I have a 409 with the org 2-4 barrle intake with 2 500 cfms carbs
my question is where does the vacumn advance go to
for the dist.
facing the front carb, I have 3 fitting
the one on the left is at the same level as the center one
the one on the right is lower then the other 2
I think the vac. advance goes to the center
The rear carb., has all the vac. fitting pluged except the one in the back, which I have my pcv valve hooked to
Thanks
roger
61 bubbletop
409 425 hp
4 speed
factory a/c
I need some infomation with elderbrock 500 cfm carb.
I have a 409 with the org 2-4 barrle intake with 2 500 cfms carbs
my question is where does the vacumn advance go to
for the dist.
facing the front carb, I have 3 fitting
the one on the left is at the same level as the center one
the one on the right is lower then the other 2
I think the vac. advance goes to the center
The rear carb., has all the vac. fitting pluged except the one in the back, which I have my pcv valve hooked to
Thanks
roger
61 bubbletop
409 425 hp
4 speed
factory a/c
