Bryan is at Dragway 42. First time out with the new mill. Big grin that you could not wipe off his face with lacquer thinner. I'll let him tell. It's all good.
We're not even in the game.Oh oh, sounds bad for the rest of us...
Sounds good Brian, I talked to Ralph yesterday and he's going back to St Louis Gateway on the 26th. His second pass in his 63 he went 10.77 @124, his first pass he went 10.88 @ 126. Sounds like you guys would be good competition for. . each other. He told me that he jetted his 800's down a couple of steps cuz it was a little fat and he changed the gear in the car. He made one pass and spun pretty bad and then the monsoon came. That four letter word called rain. Ralph also found that one of his plug wires was bad and he was only getting half the temperature in one of the cylinders. Be interesting to see what he runs in 2 weeks he's going back to Gateway on a Wednesday night test and tune. I plan on being there I'd like to take my beater Nova.Don my first two passes were 10.856 and 10.860 at 114mph
10.62 at 118mph was best out of four. traction wasn’t too good and I’ve got too much gear ( which I knew) so I had to let off past the 1/8th somewhere and just drive it out. Best 60’ was a 1.48
What gear is in it now? I was basing my guess from the times that you were running at BG last year in very hot and humid[the air sucked] conditions.I'm sure that the temps and air at Thompson were much better.10.62 at 118mph was best out of four. traction wasn’t too good and I’ve got too much gear ( which I knew) so I had to let off past the 1/8th somewhere and just drive it out. Best 60’ was a 1.48
This is the new engine from mcquillens don that dynoed 705What gear is in it now? I was basing my guess from the times that you were running at BG last year in very hot and humid[the air sucked] conditions.I'm sure that the temps and air at Thompson were much better.
I can see speeds of 128-130 here on a good day with the right gear.I’ll say I think there’s 10mph left in it we’ll see I guess. I’ve got a video but can’t get it to load