Impala Steve
Well Known Member
Hi, I'm doing an HEI install on a 58 Impala with a 348 motor, did you eliminate the ballast? where do I install the tach lead on the HEI pigtail since I don't have a tachometer?
What do you recommend using to cap off the tach lead wire? Shrink tube or some other material?If you don't have a tach, the wire on the plug at the distributor tach output could be eliminated or capped off.
Thank you Don Jacks, will eliminate the ballast resistor.The HEI must run at battery voltage.The resister block/wire must be eliminated.