Impala rear seat removal

Dan Hunt

Dan Hunt

Well Known Member
Supporting Member 5
How is the top of a 63 impala SS seat held in?I have the bottom removed and the bottom of the back done but I can't remember how to get the top unhooked.
Thanks Dan
 
Old School

Old School

 
Supporting Member 1
Dan Hunt said:
How is the top of a 63 impala SS seat held in?I have the bottom removed and the bottom of the back done but I can't remember how to get the top unhooked.
Thanks Dan
Click to expand...
Remove the two lower bolts holding the springs then lift the seat back straight up..
 
Impalaguru

Impalaguru

Well Known Member
Supporting Member 1
Actually, I think the bolt only appears on convertibles. There should be two metal "tabs" welded to the floor that you need to bend up. There is a hole drilled into the end of each so you can stick a screwdriver in there for leverage. Or, just do like I did and use your fingers. Have band-aids close by:p
Ross
 
You must log in or register to reply here.
Top