Mr.1961
Well Known Member
It is an 8" booster with an offset bracket from CPP.
http://www.classicperform.com/Store/1955_1970_Fullsize_Cars/5561FBBO.htm
Where are my carbs?
It is an 8" booster with an offset bracket from CPP.
http://www.classicperform.com/Store/1955_1970_Fullsize_Cars/5561FBBO.htm
Where are my carbs?
Time to bring this post up to date. Haven't worked on it for some time now, so I figured I should get it done.
I took her for the first drive today and it did great! Storm rolling in so I couldn't take it far. Brought it back into the garage and charged the A/C. It blows colder than my Yukon! bang
Got a few small items to finish up and then she will be finished!
Brian,
Can you get the valve cover off with this setup? I have the same valve covers on my 62 SS but without a offset booster. I just purchased this offset booster form CCP for my car.
I note the under dash hookup arm, it looks too long to fit my brake pedal?
I had to cut off the rod coming out of my booster, it was too long to fit without hitting the firewall on my car. Any comments on fitting related to these issues.
My setup looks alot like this one. It came from Right Stuff in Ohio. I attached a picture showing my set up.
It looks like I will have to move my sun tach box. Will my washer bottle have to move ?
Paul
Iowa
Ditto, looks damn nice.Looks nice Paul.