Hi guys! I fell off the radar for a bit, nasty divorce stuff and all in the past now and she didn’t get my car!!! However everything got put on hold after i got the 409 crank from Tom because of it but i put everything in storage out of sight. On top of that my original 66 SS shell got smashed in a windstorm! I bought another one and now revisiting the 348/409 build. I'm starting to collect the parts I need and need a little help. I wrote down the list from a couple of years ago to go with the crank I got from Tom #3788072, it’s ground 30/30. Here’s the list I wrote down. Bore 30 over, KB Pistons 11-1, seems to be alot of options Valve Pockets?? forged etc., rods 6.385 or 6.135? Comp 0951 Cam, solid or Hydraulic Lifters? i know when i fit the Crank in the 348 block the 348 pistons would hit the counterweights on the crank. i'll also buy a set of heads as the ones that were on the 348 are 555 small port and valves. remember this is a double notch block and im trying to get 400HP or close to it. hope all is well take care. good to be back