Can anyone give me the specs for the size and location of the shifter hole in the floor. My car is a 62 2 door post that I am converting to a 4 speed with bench seat.
Thanks
Somebody else probably has this info, but I can take measurements for you if you still need them. I did this on my 1962, converted from a PG to a four speed.
I did get the patterns from the 1962 Shop Manual (as I recall). I also have what I believe to be a section of floor board from a 1961 factory four speed. The measurements match.
Tom
That would be great if you could get me some measurements. I am at the stage that I need to start mocking stuff up, before I start spraying the shiny black paint.
Thanks
Shane