I found a post on here about putting a super t10 in a 60 Impala and the poster used kit 3734734 and the shift dogs from 3738609 so I will look into that more.
One other thing I have done is fix the lid on the center console I bought. The hinge was seized up and someone had tried to open it and pulled the original hinge apart. I searched and couldn't find anything for replacement parts these consoles so I found some hinge material and cut it to the same size as the original and drilled the holes to match. It's aluminum now instead of steel but I think I can polish it to be pretty close to the stock chrome one. It's not a perfect match but the material is the same thickness as original so everything sits properly. The chrome will clean up nice with some 0000 steel wool I did the right side and it is night and day difference in the second picture.
One other thing I have done is fix the lid on the center console I bought. The hinge was seized up and someone had tried to open it and pulled the original hinge apart. I searched and couldn't find anything for replacement parts these consoles so I found some hinge material and cut it to the same size as the original and drilled the holes to match. It's aluminum now instead of steel but I think I can polish it to be pretty close to the stock chrome one. It's not a perfect match but the material is the same thickness as original so everything sits properly. The chrome will clean up nice with some 0000 steel wool I did the right side and it is night and day difference in the second picture.