Don Jacks's latest activity
-
DDon Jacks reacted to Skip FIx's post in the thread What length are Z-11 and Edelbrock water pumps? with
Like.
Pulled mine out of the depths of the attic Edelbrock 5.510 to block surface. Z-11 5.580 . -
DDon Jacks reacted to 348 Patchy build's post in the thread Swap 348 into 1959 apache 3600 with Like.
Yea, l agreed Don Jacks. I’m planning to block them off with welsh plugs.
-
DThe hole in the od/side of the filter recess is oil coming from the pump. The hole on the side of the hole where the canister filter...
-
DDon Jacks replied to the thread Swap 348 into 1959 apache 3600.I think that tapping those holes with pipe plugs would be a good idea,especially if uusinbg an AFB/Edelbrock carb.
-
DDon Jacks reacted to 348 Patchy build's post in the thread Swap 348 into 1959 apache 3600 with Like.
I have now found a square bore 600 with electric choke. Hopefully that will be an easier fit up.
-
DDon Jacks reacted to 348 Patchy build's post in the thread Swap 348 into 1959 apache 3600 with Like.
I went with a 650 Holley because l couldn’t find an original 4GC carby. My biggest issue is the manifold where it comes in at the back...
-
DOne would never sell enough of the front-drive setups for a W-engine to recoup the investment. Not really feasible for anything but a...
-
DThose would be pretty ambitious. We currently do not use raw castings, therefore the cost of billet blanks the size necessary to do an...
-
DTeaser!:):):) Jeff
-
DMore Pics of Bumpers and Fenders
-
DNONE OF THIS IS FOR SALE, Just Sharing for those who havent seen before. Here is something you wont see many sets out there for a 62. I...