hrlykngt's latest activity
-
hrlykngt replied to the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit.What is the factory diameter of the mains without the bearing shells? I have decided to just strip the block back down, pull galley... -
The pair I have have both. Jeff
-
hrlykngt replied to the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit.Shouldnt I be able to clean and then torque the main to 100 and check for out of round "egging" with my bore gauge? If it is out I can...
-
-
hrlykngt reacted to Ishiftem's post in the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit with
Like.
It sure does change things. I'm amazed at how slight changes in clamping load changes housing bores. I know on my rods that call for... -
hrlykngt replied to the thread Paint Aluminum Heads.Not worried about that as much as just don’t want to see the aluminum, do know have seen folks use metal filler and similar to hide...
-
hrlykngt reacted to Ishiftem's post in the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit with Like.
As said, 110 with arp lube. BUT did the machine shop use 110 with arp lube. That is the question you need to ask. If they used oil and a...
-
hrlykngt reacted to Murphdog's post in the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit with Like.
As a side note to what Dan said about torque & lube. Some may not think it makes any difference what lube you use but I have experienced...
-
hrlykngt replied to the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit.Has Bolts not studs for mains. Will be running head studs and roller timing chain with Torrington bearing I bought from you Jeff. Will...
-
-
hrlykngt posted the thread ARP Main Bolt Torque ~ Line Hone and timing chain fit in General car talk.Have a block that had ARP Main Bolts added to it before I got, looks to have been line honed also. What would be the correct Torque for...
-
Who has painted Aluminum Edelbrock Heads? How have they held up? While I know they are Edelbrock, would like my engine compartment to...
-
hrlykngt reacted to Skip FIx's post in the thread Picked up 656 block, crank ? , piston, stroke id ... help with Like.
Ross or JE will usually make a custom size, pin height for you but I hear wait times are hit or miss how quick they will get it done...
-
hrlykngt reacted to 409Kid's post in the thread Picked up 656 block, crank ? , piston, stroke id ... help with Like.
So is this a stock stroke crank? If you need a crank, I’m sure I’ve got several good cores available. I also have several 427 Rat...
-
Like I mentioned on facebook, the pistons you have look modern. Mine are about 20 years older design.
-
hrlykngt replied to the thread Picked up 656 block, crank ? , piston, stroke id ... help.According to them would have to go thru one of their dealers and special order them. These were only 10:1 so I am thinking will probably...
-
hrlykngt replied to the thread Picked up 656 block, crank ? , piston, stroke id ... help.Ok, Mystery Solved!!! I contacted ICON, they are Special Order Pistons SO( not SD) Part # 2404, they were made for Lamar Walden in 2009...
