Recent content by Karfever

Check out this thread of my exhaust. A very easy install and very tight to the body. Sounds loud at idle and extreme when the throttle is nailed. Surprisingly it is very quiet at cruiser around 3200 rpm. http://www.348-409.com/forum/threads/flowmaster-exhaust-experience-opinion.29724/

Thanks Phil

The radio (factory am) in my 62 Impala has the letters CHEVY embossed on the push buttons. Is this correct for a 62 and if not what was the original application?

I am running a eleven inch rear tire and it is close, but no clearance issues.

Hopefully we will run into each other this summer.

This system is designed for a factory manifold/ block hugger header type installation. That said, because of the muffler location you have a multitude of options by being application specific on the muffler choice in regards to size outlet/inlet configuration etc. My car is a 427 BBC with...

What my problem is I have a good amount of play in the steering wheel right at the box (input) Maybe it is an adjustment issue (gear mesh)? Anyone have the correct technique to adjust this 605 box?

I had heard about those type of radiators. Presently I don't have any clearance issues with the 605 box.

My 62 has a 605 power steering box, but it seems to be very loose/sloppy with alot of play at the box its self. I have heard that most of these 605 boxes are rebuilt units and prone to these type of issues. I am looking at replacing the 605 box with a CPP 500 series box. Would this be a good...

I used Magnaflow 13236XL . And yes I know the trunk lid didnt look right I forgot to latch it!

I recently purchased the Flowmaster exhaust system for the 61-64 Full-size Chevy. I had my doubts that this would be a good product because of the x-frame, tight clearances and the fact that I run a 11 inch rear tire. I would have to give this system a FIVE STAR rating! It was truly a bolt-on...

You should do fine Carmine, I have used Tri=city a lot in the past with zero issues.

There is nothing wrong with a Corvette in addition to an Impala, mine is a bit newer that the Impala.

Thanks guys. I have a dark aqua interior. Gloss black it is. PHIL: BTW I found the trick to get the retainers off the seat buttons. Worked great, thanks for the help with the parts.

Need to know the correct color/finsh and sheen for the kick panel vents (grills) for a 62 Impala. Thanks!