Recent content by OSTUNNER

Excatly what I was looking for! Thanks La Hot Rods:appl

HAHA thanks for the advice Junky:good. Actually I have a wiring diagram printed out and I am going through each circuit 1 by 1. I figured I would check here to see if anyone basically had a picture of the headlight switch with each terminal labeled. This way I could double check / verify what I...

I also am in the same boat with wiring the headlight switch. I installed a new Rebel wiring harness, and I am using the existing plug/headlight switch. But I have no information on what wire goes to what term. Ishiftem do you have the complete picture of that wiring diagram so I can trace each...

It's been a while since I have posted so I thought I would do a lil status update. Somehow I wound up getting into more than I ever anticipated , but everything has been coming out fairly nice! Wrapping the tunnel with 1/8"

Thanks for all the input guys, I think once I get it all cleaned up I'm going to go ahead with painting it! The red-oxide does look good; factory correct I'm assuming ? What's the deal with acrylic enamel? If I use an acrylic enamel could I lay down ZeroRust as my "primer" ?

Hey guys, so I finally got my frame off and I'm in the process of cleaning my undercarriage. What a dirty mess. I wanted to get some opinions on whether or not I should do primer/paint or undercoat. I have read a lot of mixed reviews of undercoating as far as causing rust, chipping , cracking...

Makes complete sense 1961bubbleboy . And Pvs409 thank you for the link those cage nuts are perfect! This will save me time and a headache

Z-11Guy - Nice to see another person from the PNW. Funny you saw the car on Craigs, such a small world we live in. Your buddy has a sweet ride! Cool to see an Impala sedan making its way down Pacific Raceways:burnout

Perfect, so sounds like im on the right path. Thanks guys. One more thing, when installing the new hardware, are you just tightening the nut good with some locktite or are you actaully throwing a spot weld on the nut to body?

Looking for a little advice before i start cutting away. Im at the point where im going to be taking the body off the frame, but after many days an failed attempts at removing the 4 rear body mount bolts im at a loss. I drilled the holes above each nut, sprayed PB blast an let soak. With no luck...

Jeff Olsen - Ya i am really thinking i should keep the clutch in there! Might be a crime to take it out, was thinking T56 tho .?? BSL409 - ya the more and more i tear into it the more i find! haha getting a little intimidating but excited to turn things around

Thanks again guys, @ Phil Reed - had to put a little Americana on it!

Thanks guys !

Hows it going fellas! My name is Nate and im 27 from Seattle, WA. Ive always surfed the forums for info on different things but never fully been an active member. After meeting Dan for some parts, he informed me about this forum and the great guys that can offer their advice during my build...