Recent content by Super(sport)Man

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=4551017389

Using that one in my 64 for over two years, without a hitch or grumble.

You most likely DID, however confirm the person phishing for your info that your contact info was legit, by clicking the link. These links are sometimes unique to the spammed person, and are definately something to be avoided. This is also true of your e-mail. If you receive your e-mail with...

News is calling for rain tomorrow too..... :doh

If you have a cherry-picker that will lift high enough, you'll find that it's usually much easier to pull the engine/tranny combo piecemeal. Only real caveat is, if you do it, be sure to drain the trans pan, or use one of the plastic output shaft seals (or both) to keep the fluid from making a...

Here's a link to an Ebay auction for an NOS '64 unit. Linkage Here's an auction for the whole panel More linkage The faces DO appear slightly different, but I'd be willing to be that the underpinnings are the same.

I'm assuming that you're running radial tires here.... ....if so, the only way I've found so far, is to not install them. The radials tend to "bulge" a bit more than the old bias-ply tires, and the shoulder tends to nudge the caps off the wheel. I've given thought to seeing if I could...

Due to recent developments, I decided to take the high-road, and no longer respond to trolling of the boards. In addition, I thought I'd pass along a helpful tidbit: If you click on a member's profile, there's an "Ignore" feature. Simply clicking this, and then the "add" button will keep...

A couple of links to previous discussions, and some parts pics too!: http://www.chevytalk.org/threads/showflat.php?Cat=&Board=UBB13&Number=89455&Forum=UBB13&Words=upper%20control%20arms&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=1year&Main=89451&Search=true#Post89455...

Somebody had time on their hands, and a set of stamps, maybe with intent to sell later? :dunno

Fumes, spillage, short-circuiting...

I got a few of these split off from Bob's shipment, and they match up pretty well from where I'm sitting. Be damned if I'm going to twist myself back into a yoga-position up under the dash to see if they're marked Chinese though.... Sounds like you got hosed Ollie.....mismarked product in...

Um........................EWWWW!

A suggestion: With DVD burners pricing falling through the floor, you can pick up a high speed burner (16X) for around $70-ish. These hold roughly 6.5 times the amount of data that a CD can, and the media's prices are falling as well; $.10 a disk in some cases. At 4.7GB per disk, it makes...

Guys, I know I'm going to get flamed for this, but.... About 15 years ago, while doing a junkyard crawl through the San Fernando Valley, I'd swear that I saw a '65 Caprice parked in front of an auto parts store. Root beer brown, and I had to do a double, and triple-take because I'd never seen...