Recent content by super sport

Ebay has them search 409 wheels or 14x6 wheels.

I have two 64 dated 14x6 jk wheels and two 65 date wheels a friend of mine has at his shop. Will the 65 wheels fit and not interfere with the tie rod on my 64. I hear that the 62-63 wheels won't fit the front of a 64 impala.

I m going to order 4 BF GOODRICH silvertown 1 inch white walls 800-14 for my convertible . So far all the clean and close to original convertibles I've seen are using the BF GOODRICH 800-14. I like the way they look. Thanks

BF Goodrich or Goodyear Custom Super Cushion white wall tires. I want the correct tire and size for my 64 convertible . Anyone currently have these tires on there car . Please post picture if you do thanks. JOE .

Thanks bob 409 i will check my brakes. I was getting my inspection just to fail it cause of the emergency brake not working properly. Thank you again. Joe

How to adjust and tighten my emergency brakes on my 64 . My car still moves even when I put emergency brakes on .

I have two cans in it . To me its slightly cool I think one or two more cans will do the trick. Thanks for the advise

Thanks for the reply . I have two cans in it I have third . But didn't want to over fill and I don't have a gauge to read the proper amount of pressure in it .

How many cans of r12 does a 64 impala system hold to cool properly ?

Hi skip fix sorry i just got back on the website , if you don't mind i will call you tonight around 7.30 . Let me know if thats ok with you . Thanks Joe

Need a experienced 409 builder in Houston TX . Any recommendations. This is my first 409 builds its complete from top to bottom going in my 62 impala convertible. Thanks Joe

Mac my pad set came with four pads . I know that only two were used , but when i got four i got confused.. Thanks for the reply.

How many top pads are needed on a 64 impala convertible top ? My top came with four pads two long and two short pads . Where do the two short ones staple two or did the maurfacture send me the wrong pads for my car.

Im going to check my sparkplugs tomorrow , i have an hei distributor what should my sparkplugs be gapped 45 or what ?

Its a 250hp with edelbrock manifold , 600 Edelbrock carb larger cam and camelhump 202 valve heads . I will check the timing first . I hope its just off . Im saving up for a 700r trans in the future.