Todd Geisler
Member
I'm considering replacing the floor pan in my 1963 Impala SS with the one piece.
From what I see, it looks like there are two options.
1. OER Original Equipment Reproduction that sells for $789.99.
2. Dynacorn that retails for $1383.81.
I've learned through my years working with restoring cars professionally that buying the cheapest sheetmetal is a bad decision.
Comparing these two by description, both sound like they include the same thing. One piece floor pan, all the welded floor braces as well as inner rockers.
So that said, I'm not familiar with the quality of either really. I know Dynacorn is the company which came out with complete reproduction Camaro bodies some time ago. I've seen the OER name, but don't know how the quality of either compares.
Not looking to save a buck at the expense of quality, but any input on either company would be appreciated.
Todd
From what I see, it looks like there are two options.
1. OER Original Equipment Reproduction that sells for $789.99.
2. Dynacorn that retails for $1383.81.
I've learned through my years working with restoring cars professionally that buying the cheapest sheetmetal is a bad decision.
Comparing these two by description, both sound like they include the same thing. One piece floor pan, all the welded floor braces as well as inner rockers.
So that said, I'm not familiar with the quality of either really. I know Dynacorn is the company which came out with complete reproduction Camaro bodies some time ago. I've seen the OER name, but don't know how the quality of either compares.
Not looking to save a buck at the expense of quality, but any input on either company would be appreciated.
Todd