With all the misinformation,and out right scams out there when it comes to these engines,it takes dedication,money,smarts,cautiousnes,and /or just plain hard headness [my case] to build one of these engines.Yes,One can build 2 small blocks of equal power for what one of these engines costs,but then all you have is another "Belly Button" engine.An LS swap would also be cheaper,but it's just not the same.In my case,when it comes to street/strip small blocks,been there,done that.My love for being different,being curious,and up to the challenge has me doing my current 380 cu.in.W engine project that when done will be daily driver reliable,reasonably fuel efficient.make about 430 hp/450 ft.lbs. of torque.and will cost me just over 8,000 dollars when all is said and done.If I hadden't had the break in,I would have come in about 2,500 cheaper.