Axle reinstallation.

[1964SuperStocker]

Problem solved, see attached photo. The .102 cross section O ring is from ebay and the .071 cross section O ring is from Showcars. Stands to reason I would shave the larger O rings, I would suggest if you are replacing axle bearing O rings buy them from Showcars.

All I heard was they are a "trim to fit" application.

 

[Junky]

Problem solved, see attached photo. The .102 cross section O ring is from ebay and the .071 cross section O ring is from Showcars. Stands to reason I would shave the larger O rings, I would suggest if you are replacing axle bearing O rings buy them from Showcars.

Do you know the diameter of the "O" ring?

 

[55Brodie]

How about 100 o rings for $ 15.00?

https://www.mcmaster.com/9452K128/

 

[Toms63SSQB]

Well the 63 is all back together and running with no axle bearing gear oil leaks. Hurray.

 

[Toms63SSQB]

Do you know the diameter of the "O" ring?

Not right now, I'll measure tomorrow.

 

[Toms63SSQB]

How about 100 o rings for $ 15.00?

https://www.mcmaster.com/9452K128/

Sure looks like them.

 

[Junky]

Exactly what I was thinking... buy a bag of 100. I would prefer that they be made of Viton, since it is much more durable, and unless you tear one, it will be the last O ring you will ever use on an axle bearing.

 

[Toms63SSQB]

Junky, the diameter is + or -, 2 5/8".
Could be 2 7/8"

 

[55Brodie]

The bearing OD is 3.00".