Double flare tool for tubing, need a good one.

[blkblk63ss]

Why so it can sit on the shelf? I might make another double flare in about 5 years but when I do I can make it work again. You rich guys...

Oh, look who's talking ,,,, Got a mill and can't afford a flaring tool!!!!!!

 

[bobs409]

Rich Guys.My Credit Card, shows No indication, of that.

I told you not to donate the DNC!

 

[bobs409]

Oh, look who's talking ,,,, Got a mill and can't afford a flaring tool!!!!!!

Priorities.

 

[nomad59NZ]

I've have the Eastwood flaring tool and have made 3/8 fuel line double flare with ease.
Wouldn't use anything else these days. Even when I got burgled and lost this, it was one of the first things i replaced.

Gav

 

[La Hot Rods]

This is the set that I have.

I use the phillips screwdriver top tighten the wingnuts and to clear the inside of the tube and I keep a peace of a file in the box to flatten the end of the tube after using the tubing cutter.

 

[skipxt4]

I see Stanley, there.

 

[La Hot Rods]

As you can see I also welded a large nut on the screw so I can use a wrench or ratchet and socket for working in tight places.

 

[No409]

i use the mastercool set. best thing ive invested in( my shop is in mass, rot central) use it probally 2 times a week. i wear out the dies on 3/16 and 1/4 all the time