Moparboss
Well Known Member
I have a 1960 348. It was running wonderful very smooth. I opened the good while the motor was idling. Then I slammed it shut while the motor was running. Suddenly the idle slowed and the motor starting running wonky. So I took my timing light and the timing mark on the balancer is no longer there. It is not even close to where it was two days ago. My question is do stock 348’s bend valves if the timing Jumps? I was going to do a timing set but if they bend valves I don’t want to waste my time.
many information would be highly appreciated. Thanks in advance.
many information would be highly appreciated. Thanks in advance.