Need help identifying plastic

Jim Sullivan

Well Known Member
Supporting Member 7
#22
Well, I was cutting a piece of the slab this morning for some seat risers for the B1 tractor I'm restoring. I cut the piece with a circular saw and it cut very nicely and didn't melt at all. The top and bottom are fairly rough textured surfaces but the cut is very smooth. 20180829_064353.jpg
 

Junky

Well Known Member
#23
It looks like Corian to me, and the only way that I can suggest to verify, is that Corian only comes in 1/4" - 1/2" - 3/4", so if it is thicker than 3/4", it must be something else.