1962/409/Imp
Member
does anyone know if the upper control arms have a left and right and how to tell which is which
Those are the shaft's or the mounting bar were bolt's go though. Just to help clarify the part.I have 3-62's -all three have staight upper arms (no bends ) on the passenger side.
Two are 100 % original factory cars(that I disassembled) the other 62 has NOS GM upper arms.
The drivers sides on my 62s have the bend in the arm(like the last picture above of the passenger side) -that bend in the upper arm is to clear the factory steering shaft.
Paul
62409imp……asked for left or right, for upper control arms …….that doesn’t necessarily mean he wasn’t referring to the control arms and shafts for orientation…….I am referring to the removable shafts that bolt to the frame- that are threaded on each end for the round caps