I've previously found that Hankook has a very good selection of sizes. Just brows sizes on Tire Rack.
WELL..............
- Thread starter Phil Reed
- Start date
My original 1962 vet had black wheels from factory but it was a white car, I'll check if "colors" went on the wheels
just called Zora.......All 62's had black wheels original. 1961 was last year for body colored wheels
Guys using dog dish will usually go body color on wheels
Guys using dog dish will usually go body color on wheels
Save the money on the whitewalls, buy offbrand. You'll need every bit to buy the hubs caps https://www.ecklerscorvette.com/cor...oIq8oy8BeXdPp_y9xMkaAi6vEALw_wcB&gclsrc=aw.ds
Junky
Well Known Member
How about these........... https://www.summitracing.com/parts/C...yABEgIa-vD_BwE
Those Coopers might be a good choice, at least they don't say Hankook
I didn't know you got hubcaps with it, good deal.
Kick you out of the club? No we won't let you in!
It's too big for my wheel wells according to Mike!!!!! Checked their website and nothing else available.
All sizes are there you have to start over.
While 205/75/15 is the "normal" size, 215/70/15 might be a one size bigger possibility on your 5.5" wheels
While 205/75/15 is the "normal" size, 215/70/15 might be a one size bigger possibility on your 5.5" wheels
That 215 w/o power steering and the 62 steering geometry will be tough.......but Phil can handle it......
I didnt realize that, I have not seen 1" whitewalls anywhere other Coker or one of the other antique tire suppliers. All I have seem are either 5/8" or 3/4"
Then by all means paint the wheels red !!! I would have them powder coated
Thank you!!!
1960??