Gravy 62
Active Member
Yes F O R D.
I typed the Brand X word as hard as it was... I typed it.
Who has a 9 inch Ford in there X frame Chevy?
Does your car feel slower or different with that heavier rear?
I had a '86 Monte Carlo with a 350 and I got tired of sweeping up 7.5" rearend parts so I put a Moser 9 inch in it. That rear end made the car a PIG, I went from a 7.5"/3.42 to a 9"/ 3.50. Felt like I was towing a mobile home. My buddy put a 9 inch/4.11 in his '63 Belair (10.5:1 SBC, Dart heads, Muncie 2.20 1st gear) it would hardly break the street tires loose on black top!
Has any one experienced the same results?
I have seen Aubrey's parts for theses Chevy rearends, I seen the videos, and I talked to him on the phone last year about his products.
Who has used and abused his parts and what was the result, any problems at all?
I don't want to break another one of these rear ends. I have broken 2- 3.36 opens (I know using an open is the first problem) since June, never did a hole shot and never shifted without lifting of gas pedal. I cruise the kids and wifey around and it is not good when you have to get the family a ride home because your pride and joy's rear just took a dump!
Gravy
I typed the Brand X word as hard as it was... I typed it.
Who has a 9 inch Ford in there X frame Chevy?
Does your car feel slower or different with that heavier rear?
I had a '86 Monte Carlo with a 350 and I got tired of sweeping up 7.5" rearend parts so I put a Moser 9 inch in it. That rear end made the car a PIG, I went from a 7.5"/3.42 to a 9"/ 3.50. Felt like I was towing a mobile home. My buddy put a 9 inch/4.11 in his '63 Belair (10.5:1 SBC, Dart heads, Muncie 2.20 1st gear) it would hardly break the street tires loose on black top!
Has any one experienced the same results?
I have seen Aubrey's parts for theses Chevy rearends, I seen the videos, and I talked to him on the phone last year about his products.
Who has used and abused his parts and what was the result, any problems at all?
I don't want to break another one of these rear ends. I have broken 2- 3.36 opens (I know using an open is the first problem) since June, never did a hole shot and never shifted without lifting of gas pedal. I cruise the kids and wifey around and it is not good when you have to get the family a ride home because your pride and joy's rear just took a dump!
Gravy