-
-
1964SuperStocker replied to the thread What length are Z-11 and Edelbrock water pumps?.Any idea what car that pump came off of, the history is more important to me. -
Just chiming in here. Clean it the best you can, and have a machinist examine it. It maybe ok. My take is get a new cam from a top...
-
Clean it up with some fine steel wool or aluminum foil and then polish with some slightly worn 400 grit. Light pitting on the bearing...
-
New pistons are here and finally got what I wanted. These should be very stable in the bore compared to the old ones. They made all the...
-
1964SuperStocker replied to the thread 3D printed Intakes and other items coming for every 348-409 application..A couple questions have come up about the use of Carbon Fiber Nylon parts durability and use. Nothing is perfect and just as every other...
-
-
1964SuperStocker reacted to 427John's post in the thread Billet Timing Chain Cover 348 409 with
Like.
I can see incorporating an adjustable flex stop into the back of the water pump as a good option. The cover would need to be mighty... -
1964SuperStocker reacted to Barry Taylor's post in the thread Billet Timing Chain Cover 348 409 with Like.
A nickel size, half inch tall stop could be incorporated into the program for a stop. Total hight to be milled, determined by the user...
-
1964SuperStocker replied to the thread Billet Timing Chain Cover 348 409.The amount of strength and flex and be accounted for in the final design. I have a couple of roller cams I'm itching to try. Thankfully...
-
1964SuperStocker reacted to boxerdog's post in the thread Billet Timing Chain Cover 348 409 with Like.
I can tell you it is enough to flex a stock steel cover. Plenty of examples in the SBC world and the water pump may help. Ideally the...
-
Also works well for fragile side trim pieces
-
1964SuperStocker replied to the thread Billet Timing Chain Cover 348 409.How much pressure do you think its going to push against the cover? 10lbs? 30lbs? 50lbs? I am very doubtful it will have any issues but...
-
1964SuperStocker reacted to boxerdog's post in the thread Billet Timing Chain Cover 348 409 with Like.
Is it going to be sturdy enough to add an adjustable cam stop of some kind?
-
1964SuperStocker replied to the thread Billet Timing Chain Cover 348 409.Should have the 3D printed timing covers ready to sell by fall.
-
-
1964SuperStocker posted the thread Have a buddy looking for .030 pistons for his 348 in the 10.5-11:1 compression in Wanted Ads.Anyone have any cast 348 pistons laying around they want to sell?
-
You know I'm taking your advice and forgetting about Trump. It's time too service what I already have :drinking
-
-
Loading…
-
Loading…
