Dean's 61 bubble

had no trouble with turn signal collar, think i whacked off the 3 speed arms and made a cover for the down low part of steering...

Well, the new Lakewood solved the TKX problem, so there was a miss alignment after all. Trans stays in 4th gear now....and i am a happy...

I kinda cheated, cut off the column shifter protrusion, counter sunk a patch, filled in with duraglass, painted column and looks good...

Well, guess i am tearing part way down to install a new Lakewood Bellhousing ...was running a no name half Bellhousing, but aside from...

these are a pair of 2 1/2 (682/683) manifolds, one repaired by a foundry shop in Wichita, Ks. whose speciality is industrial very large...

HI Barry, your car looks good, hope you are well. The luck???? continues with my Biscayne...new TKX falls out of 4th gear on...

this one i will try to make....i like that strip

She’s a beauty!! Isn’t hot rodden a blast! Hang in there buddy and put those fires out one at a time!

https://www.mokandragway.com/schedule/

maybe something different on my 61 Biscayne Paul?? I understand the Tremec's come with 1330 yokes (Ford products) so you were able to...

What's going on at Mokan?

guess what...even a 1330 u-joint won't go thru the front ring of an X frame car without a little notching LOL and then when i tried to...

was 61 the last year for chrome plated ones?? i bought a 61 door hardtop channel a few years back...cut it down and re-welded the tabs...

Had my favorite welder tackle my offset stock trans cross member for my new TKX (about 1.5 " further to the rear) A little paint and...