Well, back on my Biscayne project finally, after installing the 409 in my bubbletop and playing with it all summer (heh heh) finally got the biscayne back into the work shop...finishing putting the engine together now....if only i could get a couple of you guys to come and stab it into the car, oh ... and get it running too, you would be really helping out a old man! LOL! Put the heads on today and installed the rockers. I think the 380 will run pretty good, anyway i have high hopes, that with the 4 speed and 4:11 12 bolt. After i finish plumbing the brake lines, i will put in the eng/tran. and start on the exhaust. Thinking of using Wilson headers instead of the 2 1/2 in. exhaust manifolds. I really don't know how restrictive the truck heads are, but with the large valves and a little port work, i am hoping for the best. A (racer) friend of mine said that the isky cam i'm using would be pretty radical if in a small block. Plan on having it running this spring. Hope you all are well and have a Happy Thanksgiving!!