ngale65
Member
hello everyone,
i am finishing a frame off restoration on a 1965 impala ss, i built a 496 big block with 650 hp at the flywheel. i have a m-20 4 speed that i was going to put in it and i also have a super t-10 with a nodular iron case that i can rebuild as well. i was hoping that some of you out there can give me some insight on what will hold up to that much hp.
thanks a bunch for any help
also for your 409 guys here is a good webpage, my neighbor is building new 409 blocks and heads
http://www.409raceparts.com/
i am finishing a frame off restoration on a 1965 impala ss, i built a 496 big block with 650 hp at the flywheel. i have a m-20 4 speed that i was going to put in it and i also have a super t-10 with a nodular iron case that i can rebuild as well. i was hoping that some of you out there can give me some insight on what will hold up to that much hp.
thanks a bunch for any help
also for your 409 guys here is a good webpage, my neighbor is building new 409 blocks and heads
http://www.409raceparts.com/