Back from Orlando and already have a bit of progress, QUICKJACKS!! I know its a mere speed-bump for some of y'all, but its like a skyscraper height compared to what we've been used too!! If your considering a jacking solution and have low ceilings, want to move it around easy and or outside, this is a strong contender. Easy assembly, good to go....
On the task list, we spoke with Zack and gpheaders and to be sure we had good port openings for the heads, he wanted us to mate up a flange to Bobs head and take pics inside the runners. Here's how she looks... To me, its just the two inners so 4,6 or 3,5 that he needs to move the port openings down a hair and should be set....
Used the crow foot (killer idea) on the hydrolic clutch bearing and bled the lines with the vacuum you see in the pic. Today, we'll have Jeanne or a kid come down and push so i can take a quick video of it engaging and share. .That will be a big win for us, getting the clutch right after moving it...It was a pain to get the master push rod to line up when depressing the peddle and not contorting something.
Pics to come later tonight....
On the task list, we spoke with Zack and gpheaders and to be sure we had good port openings for the heads, he wanted us to mate up a flange to Bobs head and take pics inside the runners. Here's how she looks... To me, its just the two inners so 4,6 or 3,5 that he needs to move the port openings down a hair and should be set....
Used the crow foot (killer idea) on the hydrolic clutch bearing and bled the lines with the vacuum you see in the pic. Today, we'll have Jeanne or a kid come down and push so i can take a quick video of it engaging and share. .That will be a big win for us, getting the clutch right after moving it...It was a pain to get the master push rod to line up when depressing the peddle and not contorting something.
Pics to come later tonight....