Drove car yesterday and it reminded me that it is still pulling to right when i accelerate. It has all new suspension front and rear and i double checked ball joint's lower with load off and upper's came with new tubular arm's i put on.I checked the rear and all is tight with all new bushing's. i have raised rear with the air lift bag's in spring's . My pinion angle on differential look's normal. slightly tipped down. MHRP had a post that his was pulling left after replaced suspension. My suspension is all stock in rear except track bar and it did this from day one driving. When my frame was blasted and painted the guy noticed the frame was torn where the upper control arm attached and he welded it back in and look's like it should. It only pull's when harder acceleration ,drive's straight otherwise with no pull. All help appreciated!!!!