61 Bubble
Well Known Member
Just redid the whole front on my '61. Now it seems to be a problem and not sure what to do.
Re-did the upper and lower control arm bushings, upper and lower ball joints, tie-rods, shocks, springs, disc brake conversion with 2" drop spindles.
used the same shims and cross shafts but the car seems to have a hell of a lot of negative camber?? AND the steering doesn't seem to be as tight as far as how tight of a turning circle I can do. That I figure can be taken up with re-installing the adjusting the tie rods. JUST not sure why the camber is just so far off now?????
It is going in for an alignment just like to find out what happened.
Thanks, John
Re-did the upper and lower control arm bushings, upper and lower ball joints, tie-rods, shocks, springs, disc brake conversion with 2" drop spindles.
used the same shims and cross shafts but the car seems to have a hell of a lot of negative camber?? AND the steering doesn't seem to be as tight as far as how tight of a turning circle I can do. That I figure can be taken up with re-installing the adjusting the tie rods. JUST not sure why the camber is just so far off now?????
It is going in for an alignment just like to find out what happened.
Thanks, John