Very,very nice..........
Jim , I took a look in my garage and I found 2 air cleaner elements. Part # AFP 30 that measure 13 3/4 " inside diameter and 3 1/4 " tall. I had them on Fee-Bay a while back.The AC # is A-85 C which is for a dual quad Buick 401 engine I believe. They are N.O,S and have some surface dust.You can have them for the ride to you if you want.I have been looking for a larger diameter air filter element so I am able to drop the air cleaner down further on the carburetors. The K & N filter I am using now is approximately 14" inside dia. and 3 1/4" tall, which works very well with a stock or Edelbrock intake with up to 1/2 carb spacers. Does anyone know what the dimensions were for an original Z11 air filter element? Or did they even use a filter?
Jim I have what you may need.The site will not let me post an answer to your message , so i'm posting it here.I told you you could havwe the fileter for the cost of the ride.Approx 3 pounds from 11727 to 18436 would cost $7.35 Priority mail to you. If that is OK you can pay pal meI have been looking for a larger diameter air filter element so I am able to drop the air cleaner down further on the carburetors. The K & N filter I am using now is approximately 14" inside dia. and 3 1/4" tall, which works very well with a stock or Edelbrock intake with up to 1/2 carb spacers. Does anyone know what the dimensions were for an original Z11 air filter element? Or did they even use a filter?