sycsteve
Well Known Member
Did you get the motor issue's resolved?????? Nice to get a trophy!!!!!
It doesn't seem to be blowing much oil out with the catch can.
Having problems setting my quick fuel race Q carb.
Did you get the motor issue's resolved?????? Nice to get a trophy!!!!!
Thats oil blow by unfortunitly.Carb as in too rich? Your plugs look it.
If you have a roller cam you don't want cam walk.
.010 to maybe .012 for cam play with a roller.
Are you sure your cam requires a different distributor gear?
Are you running a cam button?
Most of the time those bronze gears are short lived,especially when heavy oil and high volume oil pumps are used.The melonized gears are better and with the exception of Lunati's "everwear" gears are cheaper than most of the other composite gears out there.
I ordered one yesterday. Jim Worel has one in his 409 roller engine with no problems at all.
To bad I have pieces of the bronze gear in my engine now.
Most of the time those bronze gears are short lived,especially when heavy oil and high volume oil pumps are used.The melonized gears are better and with the exception of Lunati's "everwear" gears are cheaper than most of the other composite gears out there.