Hayden Proffitt's Z11 (a tribute)

[409envy]

Current state of the body.

 

[La Hot Rods]

Nice, should be a good marriage coming soon.

 

[RussC]

It has certainly grown since I saw it last...making a nice car

 

[409gang]

Current state of the body.
View attachment 91474View attachment 91475

Those 1/4's look pretty good, what make are they?

 

[Jim Sullivan]

Moving right along Evan.

 

[409envy]

Those 1/4's look pretty good, what make are they?

Dynacorn I believe

 

[409envy]

Rolling chassis on its way down to Missouri. Body will be dropped in place and final gaps set before filler is applied. Then blocked and sealed and off we go!

 

[63impalass409]

Looking good

 

[Jim Sullivan]

 

[Tom Kochtanek]

Nice detail work on the chassis! Now I know why you wanted to tackle it .

Want me to send you another one? I know of one that is getting readied for the same rotisserie in a bit .

All kidding aside, but I was wondering what frame the body is on at the moment? Or was that finished frame from a donor?

Cheers! TomK

 

[409envy]

Send it up... as long as you are footing the bill!! The frame that is under the body currently came with the car. It has some significant rot in the frame rails and the front frame horns are tweaked. This frame was generously donated by Dennis Jackson...

 

[Phil Reed]

Commonly referred to as Jack Wagon!!!!!!!!!!!!

 

[Tooth]

Very nice Evan, May go and take a peek at it soon. Looks like you’re moving along pretty steadily, keep up the pics and the good work! Sometimes I’ll bet it’s pretty hard to not be right there checking it out and wondering. It’s not like you’re an hour and a half away you’re a day and a half away! Going to be an awesome tribute!

 

[R63ss]

The frame looks great.I can’t wait to see this completed.

 

[409envy]

Rodney sent me some updated pictures. Rockers are in, new wheel tubs are in. Quarters are only mocked up. Gaps and panel alignment look pretty good. He’s waiting on my frame to set final gaps.

 

[409gang]

Should be a nice ride when finished, everything looks real good!!

 

[Jim Sullivan]

 

[heddrik]

What, no aluminum doors or quarter panels?? Looks incredible sir.

 

[409envy]

Frame arrived at Rodney’s today...

Rodney also got the deck lid fitted... took 2 days.

 

[409envy]

Strikers and latches are installed on doors. Starting to align fender and door gaps. The fenders look a helluva lot better than they did when I dropped them off!